PTFE Sleevings - PTFE Sleevings Exporter, Manufacturer & Supplier, Meerut, India

<< Previous PTFE Sleevings

Product Code : 06

Product Specification

PTFE Sleeves
Poly Tetra Fluoro Ethylene (PTFE) Sleevings and Tubings are intended for applications involving High Frequencies, High Temperature or both. PTFE have excellent electrical properties, which does not change over a wide range of frequencies, temperatures and humidity. These sleevings and tubings are manufactured by Tape Wrapping Sintering (TWS) process that enables these high flexibility and excellent mechanical stability. Few of the advantages of

PTFE Insulation are as follows

Extremely stable at high temperatures and can be used continuously at Ã¢â‚¬â€œ65Ã‚Â°C to +250Ã‚Â°C.
Non-Flammable
High Dielectric strength
Virtually inert to almost known chemicals, UV radiation, oils, solvents and fluxes
Excellent anti-stick properties prevents the build up of sediments, and fungus
Biocompatible
Extremely hydro-phobic and sheds water almost totally

Applications of PTFE Sleevings and Tubings

Radars, Satellites and other defense electronics equipments
Due to high temperature proximity widely used for heater interconnections
Insulating cover for electrical joints, Motor winding leads and Transformer winding leads
Protective cover over electrical leads in Air-conditioning sealed units
RF Signal transmission, antennas
For branching leads in harness/cable assembly
In communications, control Instruments and professional electronics
As carriers for corrosive, high viscosity chemicals or fluids, also under high pressure and temperature
As protective cover over hoses for injection moulding machines
Hoses (with or without stainless steel wire braid) for hydraulic/pneumatic applications
As capillaries for medical application
Temperature sensors, Automobiles etc.

Technical Details

Dielectric Breakdown:

Wall thickness	Volts (AC RMS)
0.25MM	11,500
0.30MM	14,600
0.40MM	16,300
0.50MM	17,000

Lengthwise shrinkage after 2 Hours at 300Ã‚Â°C : 1% Max. Datasheets

I.D. (MM)		Wall Thickness (MM)
Nominal	Tolerance	Nominal	Tolerance
0.50	+ 0.10	0.25	+ 0.05
1.00	+ 0.10	0.25	+ 0.05
1.50	+ 0.15	0.25	+ 0.08
2.00	+ 0.15	0.30	+ 0.08
2.50	+ 0.15	0.30	+ 0.08
3.00	+ 0.15	0.35	+ 0.08
4.00	+ 0.20	0.40	+ 0.08
5.00	+ 0.20	0.50	+ 0.10
6.00	+ 0.30	0.50	+ 0.10
7.00	+ 0.30	0.50	+ 0.10
8.00	+ 0.30	0.50	+ 0.10
9.00	+ 0.30	0.50	+ 0.10

Note
Sizes other then above table can also be Manufactured as per customer requirement. We also manufacture Sleevings with Fiber Glass/ Polyester Braiding for special applications.

Information

Please specify nominal ID, wall thickness and colour.
Minimum Order: 100 m of one size or color
Standard Packaging:
Upto 3.5 mm ID: 50/100 Mtr coils, 1-4 meters nominal, random lengths.
4 mm or larger ID: 25/50 Mtr straight bundles, 1 meter nominal, random lengths.
Cut lengths: Pieces cut to specified lengths also available .

Other Products in 'PTFE Sleeves' category

PTFE Sleeves	PTFE Sleevings

<< Back